We Get You Back In Business In Holmdel After A Mold Damage Disaster

12/27/2019 (Permalink)

We isolate areas affected by mold using physical barriers and a negative air pressure chamber.

Managing Commercial Mold Damage Remediation in Your Holmdel Factory

The musty odor in your Holmdel factory might indicate a microbial infestation. These microbes live in damp conditions, depending on air currents to establish new colonies. Underneath large pieces of equipment, inside coat closets, or below breakroom sinks give microbes enclosed areas rich in cellulose and other food sources. While microbes exist on almost every surface, including just-cleaned ones, they do not usually cause a problem unless certain conditions exist in their immediate environment.

SERVPRO's remediation experts can help you manage the situation that lead to your Holmdel factory's commercial mold damage situation. Mold is one of the most prolific microbes on Earth. Cleaning surfaces can actually spread mold by causing it to release spores into the air. We use specialized methods to trap the mold and its spores, so new colonies do not have a chance to start. 

Our building services team does the same with your HVAC units and ducts. Once we clean your ventilation system's components, hidden microbes cannot get whisked out and into the air, nor start to grow inside the system itself. HEPA-grade filters do prevent spores from traveling far, which is why we use them in our equipment. We change out filers in your system or clean non-disposable ones for you.

When mold damage affects a particular area, we often construct a temporary chamber. We do this to protect other areas from the spores that often release into the air. Using an air scrubber, we can create a negative pressure that prevents microbes from escaping while still allowing clean air to enter the area. 

Air and its circulation helps speed up the desiccation of damp areas, making it more difficult for microbes like mold to thrive. Temperature changes do little to prevent mold, and does little to help remediate it from any specific area. Higher temps can make drying out damp areas happen more swiftly, however, so we might choose to use heated air to dry out materials as rapidly as possible. Keeping the interior of your factory arid after we finish mold damage remediation might require desiccant machinery, which we can help install for you.

When your factory in Hazlet, Matawan, or Keyport needs mold damage remediation and prevention, call SERVPRO of Aberdeen / Holmdel at (732) 290-3170. We're Faster To Any Size Disaster, and always ready to help.

See more about Holmdel.